There are two possible troubles in application:
- Fatal error and application is closed.
- Non fatal error and application keeps running.
1. Fatal error
- Application was shut down because of some error.
- You had probably opened some project. Now it is not possible to open project, because it is read-only. You have to remove read-only flag from project file manually (see “4.2. Project is already in use“).
- Run application and open the used last project.
- Check project for damages, if it is necessary, reverse last step you have done before application was shut down.
2. Non fatal error
- Save your work.
- Close application correctly.
- Run application once again and open last project.
- Check project for damages, if it is necessary, reverse last step you have done before error occured.
If you experience some troubles, that can not be solved as described in this chapter, refer to Helptrix support page.
